Honeywell International Inc. CS19A ユーザーズマニュアル
3 - 21
To rename scanners with sequential, numeric names, scan the bar codes
below.
below.
Scan the Reset code after each name change and wait for the scanner
to re-link to the base before scanning another bar code to rename the next
scanner.
scanner.
Alternatively, you may change the name with a bar code command if you cannot
send serial commands to the base. One way to do this is to scan the bar code
below and scan a number for the scanner name. For example, if you had 7
scanners to one base, scan the bar code below with the first scanner, scan the
1
send serial commands to the base. One way to do this is to scan the bar code
below and scan a number for the scanner name. For example, if you had 7
scanners to one base, scan the bar code below with the first scanner, scan the
1
inside the back cover of this manual and
scan Save. Then scan the Reset bar code and wait for the scanner to re-link to
the base before scanning the next bar code. Repeat that process for scanner
number 2, 3, 4, etc.
the base before scanning the next bar code. Repeat that process for scanner
number 2, 3, 4, etc.
0001
0002
0003
0005
0007
0004
Reset
0006
Scanner Name
Preliminary Draft