Honeywell International Inc. CT50L0N ユーザーズマニュアル
Chapter 3 — About the Scanner
Dolphin CT50 Mobile Computer User Guide
43
Imager Settings
You should not need to modify the Imager Settings. The Override
Recommended Values setting is disabled by default. The recommended
Imager Settings are designed to work in a wide range of environments
and should only be modified if you have an advanced understanding of
imagers.
Recommended Values setting is disabled by default. The recommended
Imager Settings are designed to work in a wide range of environments
and should only be modified if you have an advanced understanding of
imagers.
Trigger Settings
Use the Trigger Settings to configure how the scan buttons work.
Notification Settings
Use the Notification Settings to configure how your CT50 responds when
you scan a bar code.
you scan a bar code.
Trigger Settings
Setting
Description
Default
Decode Timeout
Scanning automatically turns off after this
number of seconds if the scan trigger is
pressed and nothing has successfully
decoded.
number of seconds if the scan trigger is
pressed and nothing has successfully
decoded.
20
Notification Settings
Setting
Description
Default
Good Read Notification
Enables or disables a good read notification.
The notification consists of a green blink of the
Good Read LED, a short beep, and an optional
short vibration.
The notification consists of a green blink of the
Good Read LED, a short beep, and an optional
short vibration.
Enabled
Bad Read Notification
Enables or disables notification of a failed scan.
The notification consists of a red blink of the
Good Read LED, an error beep, and an optional
short vibration.
The notification consists of a red blink of the
Good Read LED, an error beep, and an optional
short vibration.
Disabled
Vibrate Enabled
Enables or disables whether the computer
vibrates when there is a good or bad read.
vibrates when there is a good or bad read.
Disabled