Honeywell International Inc. SF61B-A ユーザーズマニュアル
Chapter 4 — Troubleshoot and Maintain the SF61B
SF61 Cordless Scanner User’s Guide
61
You scan a bar code, the
SF61B beeps twice, and
the status light blinks
green twice, but the data
is not transmitted to the
host computer.
SF61B beeps twice, and
the status light blinks
green twice, but the data
is not transmitted to the
host computer.
Try these possible solutions:
•
Make sure that your data collection application
is set up to receive data from the SF61B.
is set up to receive data from the SF61B.
•
If you are using an SD61 Base Station
connected to your host using an RS-232 cable,
make sure that the serial parameters on the
SD61 match the serial parameters of the host
computer. The default serial parameters for the
SD61 are 19200 baud, 8 data bits, no parity,
and 1 stop bit.
connected to your host using an RS-232 cable,
make sure that the serial parameters on the
SD61 match the serial parameters of the host
computer. The default serial parameters for the
SD61 are 19200 baud, 8 data bits, no parity,
and 1 stop bit.
You scan a
configuration bar code
and the SF61B emits six
very fast beeps.
configuration bar code
and the SF61B emits six
very fast beeps.
The SF61B does not recognize or support the
configuration bar code you scanned.
configuration bar code you scanned.
You scan a bar code and
the status light turns
on, but the SF61B does
not beep.
the status light turns
on, but the SF61B does
not beep.
The beep duration, volume, frequency, and
number may be deactivated:
number may be deactivated:
•
use EasySet to check your product’s settings
(see
(see
in Chapter 3,
) and
reconfigure your product if required
You cannot establish a
Bluetooth connection
with your scanner.
Bluetooth connection
with your scanner.
There may be a problem with your host Bluetooth
interface, try one or more of the following:
interface, try one or more of the following:
•
disable then enable your host Bluetooth radio
from the
from the
Device Manager (Windows host) or
equivalent for your host device
•
disconnect then reconnect your Bluetooth
adapter if applicable
adapter if applicable
•
chapter)
•
re-pair your scanner with your host device /
application (see the appropriate section in
Chapter 2,
application (see the appropriate section in
Chapter 2,
)
•
your scanner may be connecting with /
connected to another Bluetooth host,
disconnect the other Bluetooth connection if
required (see Chapter 2,
connected to another Bluetooth host,
disconnect the other Bluetooth connection if
required (see Chapter 2,
Problems and Possible Solutions (continued)
Problem
Possible Solution