Braemar Manufacturing LLC FUSION ユーザーズマニュアル
Fusion Wireless Recorder
11
look through all the available channels by pressing the Left and
Right buttons. If any channel is not available due to an error
detecting a lead, a “Lead Error” message will be displayed for only
those affected channels. If the cable becomes disconnected, all
channels will display “No Cable”.
Right buttons. If any channel is not available due to an error
detecting a lead, a “Lead Error” message will be displayed for only
those affected channels. If the cable becomes disconnected, all
channels will display “No Cable”.
To enter or exit zoom mode, press the Left and Right buttons
together for one second. A magnifying glass will appear next to the
channel number in the upper right corner. Pressing the Right button
will increase the amplitude of the signal, while pressing Left will
decrease the amplitude of the signal. Pacer pulse marks are
displayed with a paced signal below the trace to indicate each
detection of a pacer pulse.
together for one second. A magnifying glass will appear next to the
channel number in the upper right corner. Pressing the Right button
will increase the amplitude of the signal, while pressing Left will
decrease the amplitude of the signal. Pacer pulse marks are
displayed with a paced signal below the trace to indicate each
detection of a pacer pulse.
If the data looks good, press the Enter button to return to the Setup
(New Recording) Menu.
(New Recording) Menu.
If necessary, use the right and left arrow buttons to select the “?” and
press Enter for the About Screen. This screen displays the Model,
Serial Number, Recorder Firmware version, the current Time, and
the current Date.
press Enter for the About Screen. This screen displays the Model,
Serial Number, Recorder Firmware version, the current Time, and
the current Date.
General notes:
A. Lead loss and Pacer detection is on all the time.
B. The number of channels a Patient Cable contains will determine
the number of channels the Recorder will record.
C. Although the device detection algorithms are very sophisticated,
there is no guarantee that the device will catch all episodes of
arrhythmia.
arrhythmia.
Fusion Wireless Recorder
12
4. Programming the Fusion Recorder: The Fusion recorder is
preprogrammed from the factory for default settings. The device is
fully programmable through the Fusion Wireless Monitoring System
Software. Please refer to the Fusion Wireless Monitoring System
Software for programming capabilities and options.
fully programmable through the Fusion Wireless Monitoring System
Software. Please refer to the Fusion Wireless Monitoring System
Software for programming capabilities and options.
5. The Recorder is ready to record data.
Once all setup is complete, start the recording. The Recording
screen should now be displayed. Depending on the connection
status to the server, the Recording screen could be displayed in the
following way:
screen should now be displayed. Depending on the connection
status to the server, the Recording screen could be displayed in the
following way: