Unitech Electronics Co. Ltd. HT680BTGGR ユーザーズマニュアル

 

 

iv 

 

 

The Unitech HT680 series is certified in the U.S. to conform to the 

requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of 

IEC 825-1. Class II and Class 2 products are not considered to be hazardous. 

The HT680 series contains internally a Visible Laser Diode (VLD) whose 

emissions do not exceed the maximum limits as set forth in the above 

regulations. The scanner is designed so that there is no human access to 

harmful laser light during normal operation, user maintenance or during 

prescribed service operations. 

The laser safety warning label required by the DHHS/IEC for the HT680 series' 

optional laser scanner module is located on the memory compartment cover, 

on the back of the unit. 

Use of controls or adjustments or performance of procedures other 

than those specified herein may result in hazardous laser light. 

Use of optical instruments with the scanner will increase eye 

hazard. Optical instruments include binoculars, microscopes, and 

magnifying glasses. This does not include eyeglasses worn by the 

user.

The HT680 is equipped with a Lithium-Ion battery pack and backup battery. 

Both batteries will discharge after an extended period of not being used. 

When both batteries are discharged, recharge the unit for 16 hours in order to 

fully charge the main battery and backup battery. Recharge the HT680 through 

the following: 

1.  Plug the USB charging cable to the HT680 and plug the 5V/3A AC-DC 

adapter to the power jack of the USB charging cable. 

2.  Place the HT680 into the docking station and plug the 5V/3A AC-DC 

adapter to the power jack of the docking station.