Cidco Communications Corporation CL915 ユーザーズマニュアル

ページ / 36
4
FCC R
EQUIREMENTS
This product complies with Part 68 of FCC rules. The Federal Communi-
cations Commission (FCC) has established these rules that permit this 
device to be directly connected to the telephone network. Standardized 
jacks are used for these connections. This equipment should not be used 
on party lines or coin phones.
If this device is malfunctioning, it might also be harmful to the telephone 
network; disconnect the unit until the source of the problem is deter-
mined and the device is repaired.
If the telephone company requests information on what equipment is con-
nected to their lines, inform them of:
1. The telephone number to which this device is connected.
2. The FCC registration number and ringer equivalence number (REN) 
found on the bottom of the unit.
The FCC requires that you connect your device to the telephone network 
through a modular telephone outlet or jack. The appropriate outlet or jack 
is a USOC RJ-11C, RJ-14C, RJ-11W, or RJ-14W.
A label on the base of this equipment contains information about the FCC 
registration number and the Ringer Equivalence Number (REN). The REN 
determines the number of communication devices that can be connected 
to your telephone line. In most areas, the sum of RENs should not exceed 
5 devices. 
3. If too many devices are attached, they might not ring properly.
If you are using a cordless telephone product, some frequencies might 
cause interference to nearby TVs and VCRs. To minimize this type of 
interference, do not place the cordless base on or near a TV or VCR. If 
you continue to experience interference, move the base further away 
from the TV or VCR.
This equipment cannot be used on public coin telephone lines. Connection 
to party line service is subject to state tariffs.
This product is hearing aid compatible.
CL915.book  Page 4  Friday, May 4, 2001  11:35 AM