Wacom DTU2231A ユーザーズマニュアル

61

61

Interactive pen display

USING AN ALTERNATE MOUNT OR STAND

If you will be using the interactive pen display in an installation that requires the use of an alternate 
mounting platform, you can remove the adjustable stand from the unit and mount the pen display onto any 
mount arm or stand conforming to the VESA standard.

For model DTU-2231, the mount arm or stand must conform to the VESA 100 mm standard.  
Mounting screws that are 4 mm wide with a 0.7 mm pitch (M4 Regular), with a screw clearance depth of 
15 mm are required.  Exceeding the clearance depth of 15 mm will damage the internal components of the 
pen display.

To remove the adjustable stand and attach the pen display 
to a different mounting platform:

1. Turn off your computer and power off the pen display.  

Then disconnect all cables from between the unit and 
your computer.

2. Protect the display screen surface by spreading a soft 

cloth onto a flat table and placing the pen display face 
down on the cloth. 

3. Remove the four screws and lift the adjustable stand 

assembly away from the body of the unit.

4. Using the appropriate screws for your mounting 

platform, firmly attach the pen display to the alternate 
mounting platform.

5. Refer to the 

 instructions and reattach the 

cabling.

Caution

When attaching the pen display onto an alternate 
mounting platform, be sure to follow all instructions in 
the documentation supplied by the platform 
manufacturer.  If improperly installed, the unit could 
fall, resulting in damage to the unit or physical injury.