Wacom DTU-710 ユーザーズマニュアル
23
General Specifications
Physical dimensions (WxDxH):
418x362x57mm (excluding the stand)
Weight:
5.8kg (including the stand)
Main Unit input Voltage:
DC12V
Power consumption:
45W or less (DC12V)
Operating temp. & humidity:
5 to 35 deg. C, 80%RH (non condensing)
Storage temp. & humidity:
10 to 60deg. C, 90%RH (non condensing) (maximum
storage humidity is 38% at 60 deg.C, and maximum storage
temperature is 42 deg. C at 90% humidity)
LCD Display
Display:
a-Si TFT active matrix LCD
Screen size:
17 in
Resolution (75Hz Max.)
1280x1024 pixels (SXGA), 1024x768 pixels (XGA),
800x600 pixels (SVGA), 640x480 pixels (VGA)
Pixel pitch:
0.264(W) x 0.264(H)mm
Color depth:
253 levels: 16,190,000 colors (24 bit)
Signal Inputs:
Analog RGB / Digital signals (DVI 1.0)
Synchronous frequency: Horizontal 30 to 65kHz, Vertical 50
to 75Hz
All scan modes are non-interlaced.
Refresh Rate
50 to 75Hz
Plug and Play
DDC2B
On a TFT liquid crystal display, a very small number of pixels may be permanently illuminated or not illuminated
at all. This does not mean that the display is defective.
at all. This does not mean that the display is defective.
Tablet
Reading technology:
Electromagnetic reasonance method
Active area:
337.9 x 270.3mm
Resolution:
20 lpmm (0.05mm) max.
Accuracy:
+/-0.5mm, four corners ( 7 mm wide, 25 mm long from
each corner of four "L" shaped areas) to be +/-1.0mm
Maximum reading height:
5mm
Maximum report rate:
205 points/sec., max
Pressure levels:
512 levels
Communication interface:
USB or RS-232C serial
Specifications
DTU-710_EN.indd 23
04.7.20 8:32:53 PM