Mustek Systems Inc H410W ユーザーズマニュアル
18
Calibrate
Calibrate in the MicroSD Mode
1. Slide the Wi-Fi/Micro SD switch to “MicroSD”.
2. Press and hold the POWER/SCAN button for
2. Press and hold the POWER/SCAN button for
10
seconds until the Wi-Fi LED blinks a purple light.
3. Remove the plastic foil on the Calibration Sheet,
place it on the table with the white side facing up.
4. Place the scanner on the Calibration Sheet, then
move it back and forth only in the white area few
times until the Scanner turns off.