Compro Technology Inc CS530W ユーザーズマニュアル

To begin setup, insert the installation CD into your CD-ROM 

drive, and the iWizard will start automatically. ( If it doesn’t, 

browse the contents of the CD and run the ‘iWizard.exe’). 
Then, select the language and the device you wish to set up. 
The first step shows how to connect all the cables. Hit [Next] 
twice to proceed with the 2nd step in which the iWizard scans 
for available cameras on your local network. Then select your 
camera from the list, and wait until the live video and camera 
information are displayed on the right. (You can double-check 
the device name and the MAC ID which are printed on the serial 
number sticker on the back of the camera and on the package). 
Click [Next] when you’re ready. Meanwhile, if you see the 
Windows Security Alert dialog box during the search, please 
choose [Unblock].

The default password is `admin.’ Enter a new password here  

(please note down your new password). You can also click 

[Next] to skip this process. 

Check the camera name, date and time setting.

Please check the package contents. If anything is missing, please 
don’t hesitate to contact your local distributor. 

Network camera

RJ-45 LAN cable

Screw for ceiling mount x 3, 

screw anchor x 3, camera pad x4

Quick installation guide

2x

2x

Installation CD

Wall mount plate

Power adapter

Wireless antenna (only available 

for CS530W)

  IR LEDs x 6 (12 in total)
  Light sensor
 Lens
  IR LEDs x 6 (12 in total)
  D e t a c h a b l e   w i r e l e s s 

antenna

  Microphone
  LED status indicator

  Ethernet port
  Reset button
  Audio output
  Microphone in
  Power connector
  WPS button

  LAN cable from PC to switch/router: If your LAN cable from 

PC has been connected to the Cable/ADSL modem, please re-
connect it to the Ethernet port of your network switch/router.

  Ethernet port on camera: Use the bundled RJ-45 LAN cable to 

connect the Ethernet port of the IP camera to the Ethernet port 
of your switch/router. Note you must use wired Ethernet to 
configure wireless connection on CS530W

  Wireless antenna (for CS530W only): If you are installing a 

Compro CS530W, attach the supplied wireless antenna to the 
connector provided on the back of the camera.

  Power: Attach the power adapter to the camera’s power 

connector and connect the power plug to a power outlet.

Follow the instruction below to mount the camera on the wall or ceiling.

  Fix the mounting plate.

  Attach the IP camera.

  Loosen the screw that 

fixes the trapezoid-shaped 
fastening bracket

  Let fastening bracket slide 

into it s p osition on the 
camera base (as circled).

  Push and hold the fastening 

bracket to the right.

  Tighten the screw on the 

fastening bracket.

  IR LEDs x 6 (12 in total)
  Light sensor
 Lens
  IR LEDs x 6 (12 in total)
  Built-in microphone
  LED status indicator 
  Ethernet port

  Reset button
  Audio output
  Microphone in
  Power connector

*  Do not rotate your CS530/CS530W camera manually as it may