Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide
125
Figure 5-57 Active SU Link Profile
:
•
You can add a maximum of 250 entries in the profiles table.
•
page, you can view the active profile the link is associated with.
5.4.4.2 Edit a Mapped Profile
: In this section, we have explained the method to edit a mapped link profile of an SU. The same method should be
followed to edit a mapped link profile of a BSU.
To edit a mapped profile, click Edit in the SU Profiles screen. The SU Profile Edit Entry screen appears:
Figure 5-58 Edit a Mapped Profile
Make the necessary edits, and click OK followed by COMMIT.
: When the radio mode is changed (say BSU to SU, or SU to BSU), the link profiles and the peer profile mapping list is
retained.
5.5 Security
5.5.1 Wireless Security
The Wireless Security feature helps to configure security mechanisms to secure the communication link between a BSU and
an SU, and a link between End Point A and End Point B. By default, the default security is WORP Security. A maximum of
eight security profiles can be created as required; however, only one security profile can be active at a time. The active security
profile is configured as part of the WORP property Security Profile Name. For a security profile to be active, it must be
enabled. Refer to
an SU, and a link between End Point A and End Point B. By default, the default security is WORP Security. A maximum of
eight security profiles can be created as required; however, only one security profile can be active at a time. The active security
profile is configured as part of the WORP property Security Profile Name. For a security profile to be active, it must be
enabled. Refer to
for more details.