Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide
166
Given below is the table which explains the method to add VLAN IDs to Trunk Table:
2. Click Add.
3. To save and apply the configured parameters on the device, click COMMIT.
: You can configure a maximum of 256 trunk VLAN Ids in a BSU and End Point A device, and 16 trunk VLAN Ids in an
SU and End Point B device.
5.9 RADIUS Based SU VLAN Configuration
RADIUS based VLAN configuration enables you to configure VLAN parameters on an SU through RADIUS Server. This way of
configuring VLAN parameters,
configuring VLAN parameters,
•
Reduces the task of manually configuring VLAN parameters on each SU available on the network
•
Allows SU to remain on the same VLAN as it moves across the network
Explained below is the process followed to configure VLAN parameters on an SU from a RADIUS Server.
Figure 5-100 RADIUS Based VLAN Configuration
To connect to a BSU, the SU sends a registration request to BSU. On receiving the registration request, the BSU sends an
Access request along with the SU MAC address, to the RADIUS Server. The RADIUS Server then checks the authentication of
the user. If it is an authenticated user, it sends an Access-Accept response along with Vendor assigned VLAN parameter’s value
to the BSU. On receiving the response, the BSU sends the response to the SU. The received VLAN parameters are then applied
on the SU.
Access request along with the SU MAC address, to the RADIUS Server. The RADIUS Server then checks the authentication of
the user. If it is an authenticated user, it sends an Access-Accept response along with Vendor assigned VLAN parameter’s value
to the BSU. On receiving the response, the BSU sends the response to the SU. The received VLAN parameters are then applied
on the SU.
Given below are the vendor specific attributes:
Parameter
Description
Trunk Id
Enter VLAN ID in the Trunk Id box.
Entry Status
This parameter indicates the status of each VLAN Trunk Id entry. By default, the Trunk Id is
enabled. To disable, select Disable from the Entry Status box.
enabled. To disable, select Disable from the Entry Status box.
Name of the attribute
Vendor Assigned
Attribute Number
Attribute
Format
Attribute Value
SU VLAN MAC
3
MacAddr
SU Mac Address