Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

If you have configured any user-defined protocols then click OK and then COMMIT.

For example, a device with the following configuration would discard frames received on its Ethernet interface with a UDP
destination port number of 137, effectively blocking NETBIOS Name Service packets. Please note that even the Filtering
Control should be enabled to apply the filter.

To add user-defined TCP/UDP port filter entries to the table, click Add in the TCP / UDP Port Filter screen. The TCP/UDP
Port Filter Add Row screen appears: 

Provide details for all the parameters and click Add. 

To apply the configured parameters, click COMMIT.

Port Number

Represents the destination port number. Please note that the system throws an error when 
an attempt is made to edit the port number.

Port Type

Represents the port type (TCP, UDP, Both). 

Filter Interface

Represents the interface on which the filter is applied. The supported interfaces are,

•

Only Ethernet

•

Only Wireless

•

All Interfaces

Entry Status

Set the entry status as either Enable, Disable or Delete.

•

Enable: Filter is applied and filters the packet based on the Port number and port 
type.

•

Disable: No filter is applied.

•

Delete: Allows to delete only user-defined TCP/UDP port filter entry. When you 
attempt to delete default entries, the device throws an error.

NETBIOS Name Service

137

UDP

Ethernet

Enable