Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

Given below is the table which explains System parameters and the method to configure the configurable parameter(s):

After configuring the required parameters, click OK and then COMMIT.

The Inventory Management tab provides inventory information about the device.

To view inventory information, navigate to MANAGEMENT > System > Inventory Management. The System Inventory 
Management Table appears.

System Up-Time

This is a read-only parameter. It represents the operational time of the device since its last 
reboot. 

System Description

This is a read-only parameter. It provides system description such as system name, 
firmware version and the latest firmware build supported.

For example: MP-8200-BSU-G-US-v3.X.Y(Build No.)

System Name

Represents the name assigned to the device. You can enter a system name of maximum 64 
characters and should be unique across all devices in WORP network.

Email

Represents the email address of the person administering the device. You can enter an 
email address of minimum 6 and maximum 32 characters.

Phone Number

Represents the phone number of the person administering the device. You can enter a 
phone number of minimum 6 and maximum 32 characters.

Location

Represents the location where the device is installed. You can enter the location name of 
minimum 0 and maximum 255 characters.

GPS Longitude

Represents the longitude at which the device is installed. You can enter a longitude value 
of minimum 0 and maximum 255 characters.

GPS Latitude

Represents the latitude at which the device is installed. You can enter a latitude value of 
minimum 0 and maximum 255 characters.

GPS Altitude

Represents the altitude at which the device is installed. You can enter a altitude value of 
minimum 0 and maximum 255 characters.