Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Proxim Wireless Corporation
  4. XB92WFR
  5. ユーザーズマニュアル

Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

ダウンロード
ページ / 336
Management
Tsunami
®
 800 & 8000 Series - Software Management Guide 
199
2. In the HTTP screen, click Browse to locate the license upgrade(.bin) file to be loaded on the device.
3. Click Upgrade button to upgrade the license on the device and then reboot the device.
6.2.5.2 Upgrade License via TFTP
To upgrade the license file using TFTP Server, do the following:
1. Navigate to MANAGEMENT > File Management > Update License > TFTP. 
Figure 6-12 Upgrade License via TFTP
2. Based on the IP mode, configure either IPv4 or IPv6 address as TFTP Server address. 
3. Enter the name of the file (including the file extension) that has to be loaded on the device, in the File Name box.
4. Click Upgrade button to upgrade the license on the device and then reboot the device. 
:
•
Upgrade license can be done through CLI/Web Interface/SNMP.
•
License Upgrade for Bandwidth:
–
It is applicable only to MP-820-SUA-50
+
 and MP-825-SUR-50
+
 devices.
–
Please refer to 
 
to obtain license.
–
After license upgrade and device reboot, please reconfigure the WORP input and output bandwidth limits as per
the new licensed values; for more information, refer 
Input Bandwidth Limit
 
and 
Output Bandwidth Limit
.
•
License Upgrade for WORP Sync Functionality:
–  For 82xx-G and 82x Series MP and QB devices,
•
WORP sync is enabled on units produced till the end of 2014. After this time period, license has to be obtained 
to enable this functionality. Please contact customer support/SE for more details on how to obtain the license.
6.2.6 Retrieve From Device
The Retrieve From Device tab allows you to retrieve logs, config files, and license info from the device either through HTTP
or TFTP. 
6.2.6.1 Retrieve from Device via HTTP
To retrieve files from the device by using HTTP, do the following:
1. Navigate to MANAGEMENT > File Management > Retrieve from Device > HTTP.