Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Management
Tsunami
®
800 & 8000 Series - Software Management Guide
204
After configuring the required parameters, click OK, COMMIT and then REBOOT.
6.3.2 Telnet/SSH
To configure Telnet/SSH interface parameters, navigate to MANAGEMENT > Services > Telnet / SSH.
Figure 6-19 Telnet/SSH
Monitor Password
The Administrator user has the privilege to change the Monitor user password. By default,
the Monitor user password to access HTTP/HTTPS interface is public. For security reasons it
is recommended to change the default password. The password should be alphanumeric
with minimum of 6 and maximum of 32 characters.
the Monitor user password to access HTTP/HTTPS interface is public. For security reasons it
is recommended to change the default password. The password should be alphanumeric
with minimum of 6 and maximum of 32 characters.
: The following special characters are not allowed in the password:
- = \ “ ‘ ? / space
HTTP
By default, a user can manage the device through Web Interface. To prevent access to the
device through Web Interface, select Disable.
device through Web Interface, select Disable.
HTTP Port
Represents the HTTP port to manage the device through Web Interface. By default, the
HTTP port is 80.
HTTP port is 80.
HTTPS
By default, a user can manage the device through Web Interface over secure socket Layer
(HTTPS). To prevent access to the device through HTTPS, select Disable.
(HTTPS). To prevent access to the device through HTTPS, select Disable.
: The password configuration for HTTPS is same as configured for HTTP.
Parameter
Description