Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide
245
7.10.1.3 Clear Event Log
To clear the event log messages, click Clear Event Log. The messages are cleared and moved to the backup file leaving the
event log file empty. An event is generated on clearing the event log messages.
event log file empty. An event is generated on clearing the event log messages.
: The current and the backed up event logs are stored in the flash memory and can be retrieved even after device
reboot.
7.10.2 Debug Log
Debug Log helps you to debug issues related to important features of the device. Currently, this feature supports only DDRS
and DFS. This feature helps the engineering team to get valuable information from the field to analyze the issues and provide
faster solution. This feature should be used only in consultation with the Proxim Customer Support team. Once logging is
enabled, the Debug Log file can be retrieved via HTTP or TFTP.
and DFS. This feature helps the engineering team to get valuable information from the field to analyze the issues and provide
faster solution. This feature should be used only in consultation with the Proxim Customer Support team. Once logging is
enabled, the Debug Log file can be retrieved via HTTP or TFTP.
To enable Debug Log, navigate to MONITOR > Logs > Debug Log. The Debug Log screen appears:
Figure 7-34 Debug Log
Features: Select the appropriate features to be logged. The available features are Select All, DDRS Level 1, DDRS Level 2, DDRS
Level 3 and DFS.
Level 3 and DFS.
File Status: This parameter displays the current size of the Debug Log file.
After selecting the DDRS level, click OK.
To delete the Debug Log, click Clear Log.
To get the updated status of the Debug Log File, Click Refresh.
7.10.3 Temperature Log
: Temperature Log is not applicable to MP-825-CPE-50, MP-825-CPE-100, MP-835-CPE-10, MP-835-CPE-25,
MP-835-CPE-50, MP-835-CPE-100, MP-820-SUA-50
+
, MP-820-SUA-100, MP-822-SUA-100, MP-825-SUR-50
+
,
MP-825-SUR-100 and QB-826-EPR/LNK-100 devices.
Temperature Log feature is used to log the internal temperature of the device for the configured temperature logging interval
(By default, it is 5 minutes). It also generates a trap and an event message when the internal temperature of the device
(By default, it is 5 minutes). It also generates a trap and an event message when the internal temperature of the device