Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide
258
7.11.5.2 Advanced
This mode helps to scan the user configured bandwidth to identify the other devices operating on different channels. This
displays the device information such as Bandwidth, Channel Number, MAC Address, System Name, Mode, Encryption, SNR,
and Packet count along with the information provided in Basic scanning mode.
displays the device information such as Bandwidth, Channel Number, MAC Address, System Name, Mode, Encryption, SNR,
and Packet count along with the information provided in Basic scanning mode.
:
•
The frequencies are scanned based on the configured Scan Bandwidth slice starting from the lower edge of
the frequency filter, and displays the results captured at that particular instance.
the frequency filter, and displays the results captured at that particular instance.
•
By default, the scan iteration is always 1 in Advanced scanning mode.
For example, let us consider the configuration values shown in the Spectrum Analyzer screen given below:
Figure 7-50 An Example - Spectrum Analyzer
Next, navigate to Spectrum Analyzer > Scan. Select the Advance tab and the following Spectrum Analyzer Scan screen
appears.
appears.
Figure 7-51 An Example - Spectrum Analyzer Scan (Advance Mode)
–
Scan Bandwidth: Select the appropriate bandwidth from the drop-down menu and click OK.
–
Next, click the Start button to scan.
The scanned results for the detected devices are displayed as shown below: