Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Tsunami
®
800 & 8000 Series - Software Management Guide
306
D
LACP - Device Management
Tsunami Quickbridge
®
devices that are part of the LACP link cannot be managed through the switches, so it is
recommended to use the second Ethernet port for management.
:
•
When using second Ethernet port for management, ensure to disable Auto Shutdown for Ethernet2. See
Auto
Shutdown
).
•
STP/LACP Frames should be set to passthru. See
Filtering (Bridge Only)
Figure D-1 Ethernet Port2 of 8xxx device connected to a PC via a Passive PoE (Proxim recommends PoE Adapter with
Part number PD-4401 to be used as Passive PoE)
In this chapter, we have chosen the following two examples to explain the device management in the LACP link, by using the
second Ethernet port.
second Ethernet port.
: Whenever the Ethernet port1 is connected to CTM2 device and the Ethernet port2 is connected to PC via
a passive PoE (Without the AC Power plugged in, Part No: PD-4401). Proxim recommends the usage of
PD-4401 for passive PoE, as the other PoEs cannot guarentee the desired Ethernet Sync functionality
PD-4401 for passive PoE, as the other PoEs cannot guarentee the desired Ethernet Sync functionality