Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Device Initialization
Tsunami
®
800 & 8000 Series - Software Management Guide
37
Figure 3-9 Commit Status with Reboot Message
3.2.3 REBOOT
Reboot operation is required for any change in the key parameters to take effect. For example, settings such as configuring
the Radio Mode, IP Address, Network Mode and so on, require device reboot for the changes to take effect.
the Radio Mode, IP Address, Network Mode and so on, require device reboot for the changes to take effect.
It is recommended that the device must be rebooted immediately after modifying a rebootable parameter. On clicking
Reboot, system displays a confirmation window, as shown below.
Reboot, system displays a confirmation window, as shown below.
Figure 3-10 Reboot
: It is always mandatory to commit the changes before REBOOT, otherwise the changes will not take effect.
To reboot the device, click OK.
3.3 Factory Default Configuration
Parameter
BSU Mode/
End Point A
SU Mode/
End Point B
User Password
public
public
System Name
System-Name
System-Name
Network Mode
Bridge
Bridge
Routing
Disabled
Disabled
IP Mode
IPv4 Only
IPv4 Only
IP Address
169.254.128.132
169.254.128.131
Subnet Mask
255.255.255.0
255.255.255.0
Address Type
Static
Static
Gateway IP Address
169.254.128.132
169.254.128.132
Network Name
MY_NETWORK
MY_NETWORK
Secondary BSU Name
Not Applicable
SU - Blank (Secondary BSU name is
not configured)
End Point B - Not Applicable
not configured)
End Point B - Not Applicable
DNS Proxy
Enabled
Enabled
Legacy Mode
BSU - Disabled
End Point A - Not Applicable
End Point A - Not Applicable
SU - Disabled
End Point B - Not Applicable
End Point B - Not Applicable