Aztech Technologies Pte Ltd. DSL1000EWL ユーザーズマニュアル
User Manual
Page 18
of 73
Setup the Device
When installing the router, find an area where there are enough electrical outlets for the router, the
main computer, and your other computer devices.
To setup the router:
1. Plug one end of the Ethernet cable from the router’s ETHERNET port and then plug the other
end into the Ethernet port in your computer.
2. If you have another device you need to connect through wire into the router, use another piece
of Ethernet cable. Plug one end of the Ethernet cable from the computer’s Ethernet port and
then plug the other end into an available Ethernet port in the router.
3. Plug one end of the telephone cable from the POTS Splitter’s ADSL port and then plug the
other end into the router’s DSL port.
POTS Splitter
Your phone line carries with it both phone calls and Internet signals. When you are using the
Internet, the connection produces high-pitched tones that can affect your voice calls when using the
phone. Installing a Plain Old Telephone Service (POTS) splitter separates the two signals and
eliminates the noise.
To setup a telephone on the POTS Splitter:
a. Locate the phone jack in your house.
b. Insert the POTS Splitter into the phone jack.
c. Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the other
end into the telephone.
4. Connect the power adapter from the router’s 12V 1A DC port into the electrical outlet.
5. Press ON.