Senstar Corporation B76060 ユーザーズマニュアル
PPD Maintenance & Technical Manual
1.0 INTRODUCTION
The Senstar-Stellar personal protection device (PPD) is a body-worn radio transmitter, which
emits an alert signal when activated. The PPD is intended to be worn on the belt of the user.
When used in a facility equipped with the Senstar-Stellar Flash
emits an alert signal when activated. The PPD is intended to be worn on the belt of the user.
When used in a facility equipped with the Senstar-Stellar Flash
TM
or Flare
TM
system, the
transmitter notifies security staff an alarm transmission has occurred and reports the location of
the user on a computerized map of the facility (Flare ONLY). Each PPD is identified by a unique
ID code. The PPD is activated by pressing the red button on the front of the unit. The unit may
also be equipped with an optional 'man-down' module and/or a tamper detection lanyard.
The PPD is activated by pressing the red button on the front of the unit. Optional activation
methods include removing a lanyard/pull-pin assembly and an automatic “man-down” mode that
is initiated based on the tilt angle of the transmitter.
This manual contains operating instructions for the PPD unit, care and maintenance instructions,
as well as a detailed theory of operations.
the user on a computerized map of the facility (Flare ONLY). Each PPD is identified by a unique
ID code. The PPD is activated by pressing the red button on the front of the unit. The unit may
also be equipped with an optional 'man-down' module and/or a tamper detection lanyard.
The PPD is activated by pressing the red button on the front of the unit. Optional activation
methods include removing a lanyard/pull-pin assembly and an automatic “man-down” mode that
is initiated based on the tilt angle of the transmitter.
This manual contains operating instructions for the PPD unit, care and maintenance instructions,
as well as a detailed theory of operations.
T1DA0502-001, Rev A
Page 4