ZyXEL Communications Corporation 5VZ-A2011 ユーザーズマニュアル
CellPipe 7130 RG User’s Guide
139
C
H A P T E R
7
Wireless LAN
7.1 Overview
This chapter describes how to perform tasks related to setting up and optimizing
your wireless network, including the following.
your wireless network, including the following.
• Turning the wireless connection on or off.
• Configuring a name, wireless channel and security for the network.
• Using WiFi Protected Setup (WPS) to configure your wireless network.
• Using a MAC (Media Access Control) address filter to restrict access to the
• Configuring a name, wireless channel and security for the network.
• Using WiFi Protected Setup (WPS) to configure your wireless network.
• Using a MAC (Media Access Control) address filter to restrict access to the
wireless network.
See
Chapter 2 on page 29
for a tutorial showing how to set up your wireless
connection in an example scenario.
See
Section 7.10 on page 159
for advanced technical information on wireless
networks.
7.1.1 What You Can Do in this Chapter
This chapter describes the CellPipe 7130 RG’s Network > Wireless LAN screens.
Use these screens to set up your CellPipe 7130 RG’s wireless connection.
Use these screens to set up your CellPipe 7130 RG’s wireless connection.
• The General screen lets you turn the wireless connection on or off, set up
wireless security and make other basic configuration changes (
Section 7.4 on
page 143
). You can also configure the MAC filter to allow or block access to the
CellPipe 7130 RG based on the MAC addresses of the wireless stations.
• The More AP screen lets you set up multiple wireless networks on your CellPipe
7130 RG (
Section 7.5 on page 152
).
• Use the WPS screen and the WPS Station screen to use WiFi Protected Setup
(WPS). WPS lets you set up a secure network quickly, when connecting to other
WPS-enabled devices.
Use the WPS screen (see
Use the WPS screen (see
Section 7.6 on page 153
) to enable or disable WPS,
generate a security PIN (Personal Identification Number) and see information
about the CellPipe 7130 RG’s WPS status.
Use the WPS Station (see
Use the WPS Station (see
Section 7.7 on page 155
) screen to set up WPS by
pressing a button or using a PIN.