ZyXEL Communications Corporation 5VZ-A2011 ユーザーズマニュアル

Chapter 7 Wireless LAN

CellPipe 7130 RG User’s Guide

The following table describes the wireless LAN security labels in this screen.

Use this screen to configure and enable WPA or WPA2 authentication; click the 
Wireless LAN link under Network to display the General screen. Select WPA or 
WPA2 from the Security Mode list. 

Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or 

WPA2 in the Wireless LAN > General screen.

Table 32   Wireless LAN > General: WPA(2)-PSK

Auto Generate 
Key

This field is only available for WPA-PSK.

Select this option to have the CellPipe 7130 RG automatically generate 
an SSID and pre-shared key. The SSID and Pre-Shared Key fields will 
not be configurable when you select this option.

Security Mode

Choose WPA-PSK or WPA2-PSK from the drop-down list box.

Active 
Compatible

This field is only available for WPA2-PSK. Select this if you want the 
CellPipe 7130 RG to support WPA-PSK and WPA2-PSK simultaneously.

Encryption

Select the encryption type (TKIP, AES or TKIP+AES) for data 
encryption.

Select TKIP if your wireless clients can all use TKIP.

Select AES if your wireless clients can all use AES.

Select TKIP+AES to allow the wireless clients to use either TKIP or 
AES.

Pre-Shared Key  The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the 

same. The only difference between the two is that WPA(2)-PSK uses a 
simple common password, instead of user-specific credentials.

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters 
(including spaces and symbols).

Group Key 
Update Timer

The Group Key Update Timer is the rate at which the AP sends a new 
group key out to all clients.