ZyXEL Communications Corporation 5VZ-A2011 ユーザーズマニュアル
Chapter 7 Wireless LAN
CellPipe 7130 RG User’s Guide
158
7.9 The Advanced Setup Screen
To configure advanced wireless settings, click Network > Wireless LAN >
Advanced Setup. The screen appears as shown.
Advanced Setup. The screen appears as shown.
Figure 51 Wireless LAN > Advanced Setup
The following table describes the labels in this screen.
Table 40 Wireless LAN > Advanced Setup
LABEL
DESCRIPTION
RTS/CTS
Threshold
Threshold
Enter a value between 0 and 2432.
Fragmentation
Threshold
Threshold
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
between 256 and 2432.
Number of
Wireless
Stations
Allowed
Wireless
Stations
Allowed
Specify the maximum number (from 1 to 64) of the wireless stations that
may connect to the CellPipe 7130 RG.
may connect to the CellPipe 7130 RG.
Output Power
Set the output power of the CellPipe 7130 RG. If there is a high density
of APs in an area, decrease the output power to reduce interference with
other APs. Select one of the following 20%, 40%, 60%, 80% or
100%.
of APs in an area, decrease the output power to reduce interference with
other APs. Select one of the following 20%, 40%, 60%, 80% or
100%.
Multicast Rate
Select a data rate at which the CellPipe 7130 RG transmits wireless
multicast traffic.
multicast traffic.
If you select a high rate, multicast traffic may occupy all the bandwidth
and cause metwork congestion.
and cause metwork congestion.