ZyXEL Communications Corporation 5VZ-A2011 ユーザーズマニュアル

Chapter 13 Static Route

CellPipe 7130 RG User’s Guide

Click Advanced > Static Route to open the Static Route screen. 

Figure 82   Advanced > Static Route

The following table describes the labels in this screen. 

Table 63   Advanced > Static Route

#

This is the number of an individual static route.

Active

This field indicates whether the rule is active or not.

Clear the check box to disable the rule. Select the check box to enable it.

Destination

This parameter specifies the IP network address of the final destination. 
Routing is always based on network number. 

Netmask

This parameter specifies the IP network subnet mask of the final 
destination.

Gateway

This is the IP address of the gateway. The gateway is a router or switch 
on the same network segment as the device's LAN or WAN port. The 
gateway helps forward packets to their destinations.

Interface

This is the WAN interface through which the traffic is routed. 

Remove

Click the icon to remove a static route from the CellPipe 7130 RG. A 
window displays asking you to confirm that you want to delete the route. 

Add

Click this to create a new rule.

Apply

Click this to apply your changes to the CellPipe 7130 RG.