ZyXEL Communications Corporation 5VZ-A2011 ユーザーズマニュアル

Chapter 4 Status Screens

CellPipe 7130 RG User’s Guide

Routing is based on the destination address only and the CellPipe 7130 RG takes 
the shortest path to forward a packet. Click Status > Route Info to access this 
screen. Use this screen to view the internal routing table on the CellPipe 7130 RG.

Figure 12   Status > Route Info 

The following table describes the labels in this screen. 

Table 10   Status > Route Info

Destination

This indicates the destination IP address of this route.

Gateway

This indicates the IP address of the gateway that helps forward this route’s 
traffic.

Subnet 
Mask

This indicates the destination subnet mask of this route.

Flag

This indicates the route status.

Up: The route is up.

!(Reject): The route is blocked and will force a route lookup to fail.

Gateway: The route uses a gateway to forward traffic. 

Host: The target of the route is a host.

Reinstate: The route is reinstated for dynamic routing.

Dynamic (redirect): The route is dynamically installed by a routing daemon 
or redirect

Modified (redirect): The route is modified from a routing daemon or 
rederict.

Metric

The metric represents the "cost of transmission". A router determines the 
best route for transmission by choosing a path with the lowest "cost". The 
smaller the number, the lower the "cost".

Service

This indicates the name of the service used to forward the route.