ZyXEL Communications Corporation AG320 ユーザーズマニュアル
ZyXEL AG-320 User’s Guide
42
Chapter 4 ZyXEL Utility Configuration
4.2.1 Security Settings
When you configure the AG-320 to connect to a network with wireless security activated and
the security settings are disabled on the AG-320, the screen varies according to the encryption
method used by the selected network.
the security settings are disabled on the AG-320, the screen varies according to the encryption
method used by the selected network.
4.2.1.1 WEP Encryption
Figure 20 Security Setting: WEP
The following table describes the labels in this screen.
Connect
Click Connect to associate to the selected wireless device.
Site Info
Click an entry in the Available Network List table to display the information of the
selected wireless device.
Network Type
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
Channel
This field displays the channel number used by each wireless device.
Encryption
This field shows whether data encryption is activated (WEP, WPA-PSK, WPA,
WPA, WPA, WPA2-PSK) or inactive (Disabled).
MAC address
This field displays the MAC address of the wireless device.
Surveyed at
This field displays the time when the wireless device is scanned.
Table 4 Site Survey (continued)
LABEL
DESCRIPTION
Table 5 Security Setting: WEP
LABEL
DESCRIPTION
Security Setting
WEP
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Encryption Type
Select an authentication method. Choices are Auto, Open System and Shared
Key.
Refer to
Refer to
Section 3.2.1.1.2 on page 33
for more information.