ZyXEL Communications Corporation EMG2926Q10A ユーザーズマニュアル

Chapter 11 Wireless LAN

EMG2926-Q10A User’s Guide

Network > Wireless LAN 2.4G/5G > WPS

The following table describes the labels in this screen.

Network > Wireless LAN 2.4G/5G > WPS

WPS Setup

WPS

Select Enable to turn on the WPS feature. Otherwise, select Disable.

PIN Code

Select Enable and click Apply to allow the PIN Configuration method. If you select 
Disable, you cannot create a new PIN number.

PIN Number

This is the WPS PIN (Personal Identification Number) of the EMG2926-Q10A. Enter this 
PIN in the configuration utility of the device you want to connect to the EMG2926-Q10A 
using WPS.

The PIN is not necessary when you use WPS push-button method.

Click Generate to generate a new PIN number.

WPS Status

Status

This displays Configured when the EMG2926-Q10A has connected to a wireless 
network using WPS or when WPS Enable is selected and wireless or wireless security 
settings have been changed. The current wireless and wireless security settings also 
appear in the screen.

This displays Unconfigured if WPS is disabled and there are no wireless or wireless 
security changes on the EMG2926-Q10A or you click Release Configuration to remove 
the configured wireless and wireless security settings.

Release 
Configuration

This button is only available when the WPS status displays Configured.

Click this button to remove all configured wireless and wireless security settings for WPS 
connections on the EMG2926-Q10A.

802.11 Mode

This is the 802.11 mode used. Only compliant WLAN devices can associate with the 
EMG2926-Q10A.

SSID

This is the name of the wireless network (the EMG2926-Q10A’s first SSID).

Security

This is the type of wireless security employed by the network.