ZyXEL Communications Corporation NWA5301NJ ユーザーズマニュアル
Chapter 12 System
NWA5301-NJ User’s Guide
114
The following table describes the labels in this screen.
12.3 Date and Time
For effective scheduling and logging, the NWA system time must be accurate. The NWA has a
software mechanism to set the time manually or get the current time and date from an external
server.
software mechanism to set the time manually or get the current time and date from an external
server.
To change your NWA’s time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the NWA’s time and date or
have the NWA get the date and time from a time server.
> Date/Time. The screen displays as shown. You can manually set the NWA’s time and date or
have the NWA get the date and time from a time server.
Figure 63
Configuration > System > Date/Time
Table 55
Configuration > System > Host Name
LABEL
DESCRIPTION
System Name
Choose a descriptive name to identify your NWA device. This name can be up to 64
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.
Domain Name
Enter the domain name (if you know it) here. This name is propagated to DHCP clients
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes “-” are accepted.
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes “-” are accepted.
Apply
Click Apply to save your changes back to the NWA.
Reset
Click Reset to return the screen to its last-saved settings.