ZyXEL Communications Corporation WAP6804 ユーザーズマニュアル

Chapter 9 Monitor

WAP6804 User’s Guide

The following table describes the labels in this screen.

Go to Monitor > Multicast Monitor. Traditionally, IP packets are transmitted in one of either two ways - 
Unicast (1 sender to 1 recipient) or Broadcast (1 sender to everybody on the network). Multicast delivers 
IP packets to just a group of hosts on the network. This screen shows a summary of the multicast group IP 
addresses.

Monitor > Multicast Monitor

The following table describes the labels in this screen.

Table 16   Monitor > MBSS Monitor

SSID

 - 5GHz

This shows the name for each BSS.

Broadcast

This shows the broadcast status of a specific MBSS. It shows 0 for Disable and 1 for Enable.

Association

This shows the number of devices 

associated

connected

 to each BSS.

Detail

Click this button and a summary table describing the BSS is displayed under the 

Status 

 table.

Association Table

The table displays after you click the Detail button.

Access Point

This shows the SSID name for each BSS.

RSSI (dbm)

This shows the RSSI (Received Signal Strength Indicator) of the wireless connection.

Rx Bytes

This shows the number of bytes that have been received by the connected client.

Tx Bytes

This shows the number of bytes that have been transmitted by the connected client.

BW

This shows the wireless bandwidth allowed for the connected wireless clients.

Time Associated

This shows the total amount of time (in seconds) the client has been associated with the BSS.

Refresh

Click this button to refresh the status of the MBSS.

Table 17   

Monitor > Multicast Monitor

Multicast IP

This field displays the multicast group IP address.

Interface

This field displays the interface that belongs to the multicast group. 

Refresh

Click this button to refresh the status of the WDS.