ZyXEL Communications Corporation WRE2206 ユーザーズマニュアル

 Chapter 6 Wireless LAN

WRE2206 User’s Guide

Use the QoS screen to enable Wifi MultiMedia Quality of Service (WMM QoS). WMM QoS prioritizes 
traffic using pre-defined voice, video, best-effort and background priorities.

Click Network > Wireless LAN > QoS. The following screen appears.

Network > Wireless LAN > QoS 

The following table describes the labels in this screen. 

Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status. 
To open this screen, click Network > Wireless LAN > WPS tab.

Preamble Type

A preamble affects the timing in your wireless network. There are two preamble modes: 
long and short.

 

If a device uses a different preamble mode than the WRE2206 does, it 

cannot communicate with the WRE2206.

Tx Power

This field controls the transmission power of the WRE2206. When using the WRE2206 
with a notebook computer, select a lower transmission power level when you are close to 
the AP in order to conserve battery power.

Apply

Click Apply to save your changes to the WRE2206.

Reset

Click Reset to reload the previous configuration for this screen.

Network > Wireless LAN > Advanced (continued)

Network > Wireless LAN > QoS

WMM QoS Policy

Enable this to have the WRE2206 automatically give a service a priority level 
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi 
MultiMedia Quality of Service) gives high priority to voice and video, which makes 
them run more smoothly.

Apply

Click Apply to save your changes to the WRE2206.