ZyXEL Communications Corporation WRE6606 ユーザーズマニュアル
Chapter 10 Wireless LAN
WRE6606 User’s Guide
64
The following table describes the wireless LAN security labels in this screen.
10.5.3 WPA-PSK/WPA2-PSK
Select W PA- PSK or W PA2 - PSK from the Securit y Mode list.
Table 19 Network > Wireless LAN 2.4G/5G > General: Static WEP
LABEL
DESCRIPTION
Security Mode
Select St at ic W EP to enable data encryption.
PassPhrase
Enter a Passphrase (up to 26 printable characters) and click Generat e.
A passphrase functions like a password. In WEP security mode, it is further converted by
the WRE6606 into a complicated string that is referred to as the “key”. This key is
requested from all devices wishing to connect to a wireless network.
the WRE6606 into a complicated string that is referred to as the “key”. This key is
requested from all devices wishing to connect to a wireless network.
WEP Encryption
Select 6 4 - bit s or 1 2 8 - bit s.
This dictates the length of the security key that the network is going to use.
Authentication
Method
Method
Select Aut o or Shared Key from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP key to login to
the wireless client. Keep this setting at Aut o unless you want to force a key verification
before communication between the wireless client and the WRE6606 occurs.
the wireless client. Keep this setting at Aut o unless you want to force a key verification
before communication between the wireless client and the WRE6606 occurs.
Select Shared Key to force the clients to provide the WEP key prior to communication.
ASCII
Select this option in order to enter ASCII characters as WEP key.
Hex
Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.
Key 1 to Key 4
The WEP keys are used to encrypt data. Both the WRE6606 and the wireless stations
must use the same WEP key for data transmission.
must use the same WEP key for data transmission.
If you chose 6 4 - bit s, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
("0-9", "A-F").
If you chose 1 2 8 - bit s, then enter 13 ASCII characters or 26 hexadecimal characters ("0-
9", "A-F").
9", "A-F").
You must configure at least one key, only one key can be activated at any one time. The
default key is key 1.
default key is key 1.
Apply
Click Apply to save your changes back to the WRE6606.
Reset
Click Reset to reload the previous configuration for this screen.