ZyXEL Communications Corporation WRE6606 ユーザーズマニュアル

Chapter 10 Wireless LAN

WRE6606 User’s Guide

assign varying security types and to different SSIDs. Wireless clients can use different SSIDs to 
associate with the same access point.

Figure 55   Network > Wireless LAN 2.4G/5G > Guest WLAN

The following table describes the labels in this screen.

Table 28   Network > Wireless LAN 2.4G/5G > Guest WLAN

Guest WLAN Setup

Guest WLAN

Select Enable to activate the guest wireless LAN. Select Disable to turn it off.

Network Name 
(SSID)

The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is 
associated. Enter a descriptive name (up to 32 printable characters found on a typical 
English language keyboard) for the wireless LAN.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station cannot 
obtain the SSID through scanning using a site survey tool.

Guest IP Address

Type an IP address for the devices on the Guest WLAN using this as the gateway IP 
address.

Guest Subnet 
Mask

Type the subnet mask for the guest wireless LAN.

Guest Start IP

This field displays the first IP address of guest wireless LAN.

Guest End IP

This field displays the last IP address of guest wireless LAN.

Security

Security Mode

Select Static W EP, W PA- PSK, and W PA2 - PSK to add security on this wireless network. 
The wireless clients which want to associate to this network must have the same wireless 
security settings as this device. After you select to use a security, additional options 
appears in this screen. See 

 for detailed information on different 

security modes. Or you can select N o Securit y to allow any client to associate this 
network without authentication

Note: If the WPS function is enabled (default), only 

No Security and WPA2-PSK are 

available in this field.