COOPER INDUSTRIES INC FH1648T ユーザーズマニュアル

5

To switch on the transmitter first release the red STOP button by turning clockwise, then momentarily
press the ON button. (The transmitter will not switch on if the STOP button is depressed). The ON light will
glow red indicating the transmitter is on and ready to use. The receiver will now respond to the function
switches. When finished operating depress the STOP button  to switch off the transmitter and disable the
receiver output relays.

The Wheels and Reels switches will not operate unless the Enable button is also pressed "at the same
time".

The transmitter incorporates an auto shut-off feature. If no control switches are operated over a three
minute period, the transmitter will switch off automatically. The ON switch must then be pressed again to
resume operation.

The ON light is also used to indicate battery level. When the light is solidly on, the battery level is
acceptable. If it blinks, the batteries require charging.

The transmitter is powered by a standard 9.6V Makita power tool battery, and a Makita charger is supplied
to re-charge the battery. Please read the instructions provided with the Makita charger. To remove the
battery, grasp the ring on the battery door and turn counter-clockwise to release the locking mechanism.
The door may now be opened and the case tilted to allow the battery to slide out. (A slight "tap" is
sometimes necessary to dislodge the battery from the contact terminals.)

                  

MAKITA BATTERY

The receiver will be operational when power is applied. It does not contain a power switch. Three LED
indicator lights on the lid are used to verify proper operation. The lights are labeled Power, ID and Link and
function as follows: