L3 Technologies AISA1 ユーザーズマニュアル
Marine Systems
Aviation Recorders
Initial Issue
Dec. 01/06
Dec. 01/06
165M0014-10
Page 1–14
1.4.2.
Pilot Systems Output Data and Formats
The output data and formats are shown in Table 1–3, and the details of the sen-
tences can be found in IEC 61162-1.
tences can be found in IEC 61162-1.
Table 1–3. Pilot System High-Speed Output Data Formats
Data
IEC 61162-1 Sentences
Prepared by AIS Transponder
Notification that a session initiated by messages
ABM, BBM, ACA, AIR is terminated
ABK - Acknowledgement Message
AIS Own-ship broadcast data (all transmissions
available)
VDO - VHF Data-link Own-vessel Message
Query response messages
ACA - AIS Channel Assignment
SSD - Station Static Data
VSD - Voyage Static Data
SSD - Station Static Data
VSD - Voyage Static Data
BIIT Results
AIS equipment status
ALR - Alarm Message
TXT - Status / Indication Message
TXT - Status / Indication Message
Received from Long Range Equipment
LR Interrogation
LRI - Long Range Interrogation
LR Function identification
LRF - Long Range Function
Received on VHF Data Link by AIS Transponder
All VDL AIS messages received
- Broadcast or
- Addressed to own station
- Broadcast or
- Addressed to own station
VDM - VHF Data Link Message
1.4.3.
Pilot Input / Output Port
The Pilot input/output port is a part of the AIS Class A stations. If the installation of
the AIS equipment is such that a pilot cannot connect his Personal Pilot Unit (PPU)
with a reasonable length of cable, an extension cable must be installed with a con-
nector located on the bridge such that the PPU can be connected on the normal
working position of the port.
the AIS equipment is such that a pilot cannot connect his Personal Pilot Unit (PPU)
with a reasonable length of cable, an extension cable must be installed with a con-
nector located on the bridge such that the PPU can be connected on the normal
working position of the port.