Creative Labs PMT-ZZ0030 ユーザーズマニュアル

Regulatory Information

The following sections contain notices for various countries: 

CAUTION: This product is intended for use with FCC/CE certified computer equipment. 

Please check the equipment operating/installation manual and/or with the equipment 

manufacturer to verify/confirm if your equipment is suitable prior to the installation or 

use of the product. 

Federal Communication Commission (FCC) 

Interference Statement 

FCC Part 15: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: 

•    Reorient or relocate the receiving antenna.

•    Increase the separation between the equipment and receiver.

•    Connect the equipment into an outlet on a circuit different from that to which the 

     receiver is connected.

•    Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

1.   This device may not cause harmful interference, and

2.   This device must accept any interference received, including interference that may 

      cause undesired operation.

CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of 

the FCC Rules, this device must be installed with computer equipment certified to 

comply with Class B limits. All cables used to connect to the computer and peripherals 

must be shielded and grounded. Operation with non-certified computers or non-

shielded cables may result in interference to radio or television reception. 

MODIFICATION: Any changes or modifications not expressly approved by the grantee 

of this device could void the user's authority to operate the device.

Technical Specifications

Device Operating Temperature range: 0°C to 45°C

Power Adapter Operating Temperature range: 0°C to 40°C

Wireless Operating Frequency: 2400 -2483.5 MHz

These specifications apply to the hanZpad operating from the supplied 5V DC 2A 

switching power supply.

China RoHS - Table of Disclosure

Singapore

Complies with
IDA Standards

DB00148

FCC Radiation Exposure Statement 

The device has been evaluated to meet general RF exposure requirement. 

The device can be used in portable exposure condition without RF restriction.

WARNING: To prevent fire or shock hazard, 
do not expose this appliance to rain or
moisture.

Safety Information

Refer to the following information to use your product safely, and to reduce the chance 

of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. 

Improper handling may void the warranty for your product. For more information, read 

the warranty available with your product.

•    Do not dismantle or attempt to repair your product. 

     Refer all servicing to authorized repair agents.

•    Do not expose your product to temperatures outside the range of 0°C to 45°C 

     (32°F to 113°F).

•    Do not pierce, crush or set fire to your product.

•    Keep your product away from strong magnetic objects.

•    Do not subject your product to excessive force or impact.

•    Do not expose your product to water or moisture.

•    If your product is moisture-resistant, take care not to immerse your product in water 

     or expose it to rain.

•    Use a mains plug that is appropriate for your country or region.

•    To be completely disconnected from the power input, the mains plug has to be 

     disconnected / detached from the mains.

•    Disconnect the mains plug when the device is expected to be unused for several days.

•    Place the product near a socket outlet, which is easily accessible.

•    When a conductive apparatus such as earphones, is used in close proximity with a 

     CRT television or CRT monitor, the latter may emit an electrostatic discharge. This 

     electrostatic discharge can be felt as a static shock. While this static shock is usually 

     harmless, it is good practice to avoid close contact with CRT devices when using 

     earphones. 

•    Do not listen to audio on your earbuds or headphones at high volume for prolonged 

     periods of time as hearing loss may result. 

     For users in the United States, go to www.hei.org for more information. 

•    Do not listen to your audio device at high volume when driving, cycling or crossing 

     the road, especially in heavy traffic, or in any other traffic condition where such use 

     will hinder safe travel on the roads. We recommend that consumers be extremely 

     cautious when using this device on the road.

•   Do not attempt to remove the embedded battery. The product must be disposed of 

    according to local environment regulations. 

•   Do not expose to excessive heat such as sunshine, fire or the like.

    CAUTION: Risk of explosion if battery is replaced by incorrect types.

    

•   The short wave radio frequency signals of a wireless device may impair the operation 

    of other electronic and medical devices.

•   Switch off the device where is prohibited. Do not use the device in medical facilities, 

    aircraft, refueling points, close to automatic doors, automatic fire alarms or other 

    automatically controlled devices.

•   Keep the device at least 20 cm from pacemakers and other medical devices. Radio 

    waves may impair the operation of pacemakers and other medical devices.

Permanent hearing loss may occur if the player is used at high volume. Set the volume 

to a safe level. You can adapt over time to a higher volume of sound that may sound 

normal but can be damaging your hearing. If you experience ringing in your ears or 

muffled speech, stop listening and have your hearing checked. The louder the volume, 

the less time is required before your hearing could be affected. 

Hearing experts suggest that to protect your hearing:

•    Limit the amount of time you use the player at high volume.

•    Avoid turning up the volume to block out noisy surroundings.

•    Turn the volume down if you can’t hear people speaking near you.

License and Copyright

The Creative Logo, HanZpad,              , Zii, the Zii logo, ZiiSound, and X-Fi are trademarks or 

registered trademarks of Creative Technology Ltd in Singapore, China and/or other countries. 

The Bluetooth® word mark and logo are owned by Bluetooth SIG, Inc. Android is a trademark 

of Google Inc. All other trademarks are the property of their respective owners and are hereby 

recognised as such. Specifications are subject to change without notice. 

Actual contents and colour of the product may differ slightly from those pictured.

Copyright © 2012 Creative Technology Ltd. All rights reserved. 

Version 1.00.00

May 2012

According to the FCC96 208 and ET95-19

Manufacturer/Importer’s Name: 

:  1901 McCarthy Boulevard 

: 

: 

Compliance Manager 

Creative Labs, Inc. 

May 31, 2012