Gainward VGA-GW905C ユーザーズマニュアル

ページ / 18
1
Congratulation on the purchase of your VGA board!  You are now the owner of a state-
of-the-art video adapter that offers features and functionality equal to, and beyond any
other in the VGA class.
System Requirements
The minimum system requirements for installing the graphics card are as follows:
  a personal computer with a Pentium, Pentium II or compatible microprocessor and at
least 8MB of memory
  a VGA analog monitor supporting a minimum 60Hz vertical refresh rate
  a free AGP or PCI bus slot
  a CD-ROM drive
Features
  128-bit S3 Savage4 3D/2D/Video Graphics Accelerator
  8/16/32 MB SDRAM Display Memory
  Full 2X/4X AGP @ 4X Speed & Bandwidth (4X AGP function is Savage4 chip
dependent) (Only for AGP model)
  Hardware DVD Motion Compensation Support for DVD playback
  Integrated 300MHz RAMDAC with Gamma Correction
  8M Triangles/second Floating Point Triangle Setup Engine
  140M Pixels/sec Trilinear Fill Rate and Brightness, Hue, and Saturation Controls
  Microsoft DX6.X & S3 S3TC Texture Compression
  Single Cycle Trilinear Filtering
  Sprite Anti-Aliasing, Reflection Mapping, Texture Morphing, Shadows, Procedural
Textures and Atmospheric Effects
  High Quality Up/Down Scalar and Maximum Resolution 1600x1200
  Full Featured 2D Engine for Acceleration of BitBLT, Rectangle Fill,
Panning/Scrolling and Hardware Cursor
  Hardware Support for Individually scalable Dual Video Windows
  60MHz VIP Video Port Allows HDTV Resolutions
  Full Hardware and BIOS Support for VESA Timings and DDC
 
To execute the Savage4 with 4X AGP mode that was depended on the main board
which can support the 4X AGP mode.  It is automatic to detect the main board AGP
mode and execute in 2X or 4X.
1
  Overview