Digigram X882HR ユーザーズマニュアル
VX881HR
&
VX882HR
User’s Manual
7
Supported operating systems
VX881HR, and VX882HR cards run under Windows 2000 and Windows XP.
HARDWARE INSTALLATION
The card has to be installed in the computer prior to installing its driver.
Installing the card
Gently plug the card into a free PCI slot and press it down to position it
firmly. Tighten the screw.
firmly. Tighten the screw.
Interrupt and memory address
Hardware interrupt and addresses are automatically set up at start-up by the
PCI PnP BIOS.
PCI PnP BIOS.
SOFTWARE INSTALLATION
Please visit the Digigram web site at www.digigram.com for the most recent
driver.
driver.
In case you run a specific application developed or installed by a Digigram
Partner, it might require the use of a specific driver version. In this case, make
sure that the updated driver has been approved by your supplier.
Partner, it might require the use of a specific driver version. In this case, make
sure that the updated driver has been approved by your supplier.
Installation under Windows 2000 and XP
If the driver has been downloaded from our web site, it has to be expanded
prior to the driver’s installation as follows: double-click on the downloaded
file (self-expanding). You can use the default destination location (Windows
temporary folder) or select another directory.
prior to the driver’s installation as follows: double-click on the downloaded
file (self-expanding). You can use the default destination location (Windows
temporary folder) or select another directory.
•
Shut down your computer and insert the PCX sound card.
•
Restart your computer.
•
Click on Cancel if the Found New Hardware Wizard appears.
•
Double-click on the setup.exe icon to launch the driver installation.
•
The welcome message is displayed, click next.
•
The “License Agreement” window appears: read it, and click on
Yes to approve it. Do the same for the “Read Me First” window.
Yes to approve it. Do the same for the “Read Me First” window.