Motorola Mobility LLC P6JF1 ユーザーズマニュアル
May 29, 2008
Module Hardware Description
9
15.221. Further, this requirement does not apply to intentional radiators that must be
professionally installed, such as perimeter protection systems and some field disturbance sensors,
or to other intentional radiators which, in accordance with Section 15.31(d), must be measured at
the installation site. However, the installer shall be responsible for ensuring that the proper
antenna is employed so that the limits in this Part are not exceeded.
professionally installed, such as perimeter protection systems and some field disturbance sensors,
or to other intentional radiators which, in accordance with Section 15.31(d), must be measured at
the installation site. However, the installer shall be responsible for ensuring that the proper
antenna is employed so that the limits in this Part are not exceeded.
Standards
•
FCC_47cfr15.247
•
FCC_47cfr15.209 & 15cfr15.205
(radiated spurious emission restricted band )
•
EN_300 328
•
IEEE Std 802.11b
•
IEEE Std 802.11g
•
EN 60950 Safety
•
RSS-210 Issue 7 (IC Canada)
•
EN 301 489-1
•
EN 301 489-17
Contact Us
We at Motorola want to make this guide as helpful as possible. Keep us informed of your comments and
suggestions for improvements.
For general contact, technical support, report documentation errors and to order manuals, use this email
address:
M2M.CustomerCare@motorola.com
Motorola appreciates feedback from the users of our information.
suggestions for improvements.
For general contact, technical support, report documentation errors and to order manuals, use this email
address:
M2M.CustomerCare@motorola.com
Motorola appreciates feedback from the users of our information.