Nokia Solutions and Networks T4KJ1 ユーザーズマニュアル
eNodeB PDU replacement procedure
Chapter 8: Field Replaceable Units
Procedure 8-16
Installing PDU to Rack (Continued)
2
Using the same four rack mounting screws, install two screws per side using
a T25 Torx bit and torque to 4.7 N-m (42 in-lb).
a T25 Torx bit and torque to 4.7 N-m (42 in-lb).
3
Perform the steps in
to reconnect power to the PDU.
4
If using a non-Motorola rack, perform the steps in
to ground
the PDU.
Figure 8-6
PDU
PDU front.eps
8-32
68P09308A55-6
FEB 2010