Proxim HARDSAP ユーザーズマニュアル

ページ / 36
21
Shared Key Authentication.  If one device is configured to use Shared Key Authentica-
tion but a second device is not, then the two devices will not communicate, even if both
devices have the same WEP Keys.
When set to Use WEP for Encryption Only, the Access Point only uses WEP to encrypt
data.  Two 802.11b devices must have the same WEP Keys to exchange data.  For
authentication purposes the Access Point uses Open System Authentication, which is an
authentication procedure that does not use WEP to prevent unauthorized devices from
associating with an 802.11b network.
When set to Use WEP for Authentication and Encryption, the Access Point uses WEP
during authentication and when exchanging data.
Note:
When the Harmony 802.11b Access Point is configured to Use WEP for
Authentication and Encryption, all of the other 802.11b devices on the same
network must use WEP both during authentication (Shared Key Authentica-
tion) and to encrypt data.
All 802.11 Access Points and 802.11b PC Cards within an ESS must have the same
encryption level and use the same WEP Key to communicate.
WEP Key Size
The Harmony 802.11b Access Point supports both 40 and 128 bit encryption using the
Wired Equivalent Privacy (WEP) algorithm.  128 bit encryption is available only in the
United States.
Each Access Point can store four 40-bit and four 128-bit WEP Keys.
WEP Keys
An 802.11b device with WEP enabled uses a WEP Key (also known as an Encryption
Key) to encrypt and decrypt information.  If the WEP Keys do not match on two radios,
no communication will take place between these devices.