Proxim STMP-10-1 ユーザーズマニュアル

This equipment has been tested and found to comply with the European Telecommuni-
cation Standard ETS 300.328.  This standard covers Wideband Data Transmission
Systems referred to in the CEPT recommendation T/R 10.01.

This type of accepted equipment is designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment.  This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual,  may cause harmful interference to
radio communications.

Before aiming the antenna or working near the antenna, read this entire manual and follow
the instructions carefully.

Be sure to provide adequate grounding and lightning protection.  Do not install the antenna
near overhead electrical wires.

Warning!  It is the responsibility of the user to ensure that the unit is properly installed in
compliance with the FCC’s guidelines for maximum permissible radio frequency expo-
sure outlined in CFR 47 Section 1.1307(b)(1), preventing excess exposure to all persons.
The installed unit should be positioned to guarantee no direct continuous exposure to
people within 20 cm (8 inches) of the antenna.  Proper operation of this radio according
to the instructions found in this manual will result in the user exposure to be substantially
below the FCC recommended limits.

Microwave radiation can cause tissue heating, potentially affecting the eyes, and causing
permanent damage to vision.