Hunter Fan Company TX47 ユーザーズマニュアル

M0126 • 08/15/16 • © 2016 Hunter Fan Company

This device complies with part 15 of the FCC Rules.  Operation is 

subject to the following two conditions: (1) this device may not cause 

harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation. 
This device complies with RSS-210 of Industry Canada.  Operation 

is subject to the following two conditions: (1) this device may not 

cause interference, and (2) this device must accept any interference, 

including interference that may cause undesired operation of the 

device.
This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules.  

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation.  This equipment 

generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause 

harmful interference to radio communications.  However there is no 

guarantee that interference will not occur in a particular installation.  If 

this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one 

or more of the following measures:  Reorient or relocate the receiving 

antenna, Increase the separation between the equipment and 

receiver, Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.  Consult the dealer or 

an experienced radio/TV technician for help.  Note: Any changes or 

modifications to the transmitter or receiver not expressly approved by 

Hunter Fan Company may void one’s authority to operate this remote 

control.

This product conforms to UL Standard 1917.

The Hunter Fan Company makes the following limited warranty to the original purchaser 

of the Control (“Control”): Your Control is warranted to be free from defects in material and 

workmanship for a period of one year from the date of sale. If the Control malfunctions 

or fails within the warranty period due to a defect in material or workmanship we will 

replace it free of charge. IF THE ORIGINAL PURCHASER CEASES TO OWN THE CONTROL, 

THIS WARRANTY AND ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO ANY 

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, 

ARE VOIDED. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE 

DURATION OF ANY IMPLIED WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN 

RESPECT TO ANY CONTROL, IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS 

WARRANTY SET FORTH ABOVE FOR SUCH CONTROL. This warranty excludes malfunctions 

or failures which were caused by repairs by persons not authorized by us, mishandling, 

improper installation, modifications, or damage to the Control while in your possession, or 

unreasonable use. This warranty does not apply to batteries or to deterioration or damage 

to the product caused by the use of faulty batteries. To obtain a replacement, return your 

Control postage prepaid along with proof of purchase to Hunter Fan Company Service 

Department at 7130 Goodlett Farms Pkwy., Memphis, TN 38016. IN NO EVENT SHALL 

HUNTER FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. 

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY 

LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS 

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER 

RIGHTS WHICH VARY FROM STATE TO STATE.

6

9

7

Installing the battery

Installing the Wall Plate

Wiring the Wall Control

Before installation, use the pull chains to set 
the fan speed to HIGH and the light to ON. 
Ensure the power is OFF at the outlet box and 
wall switch location before proceeding with 
installation.

Turn 

Pow

er

2

3

1

4

Remove the canopy. If uncertain how to remove 
it, reference the fan’s owner’s manual. With 
wiring exposed, it may be helpful to note existing 
wire connections or take a digital photo for 
reference. Remove the wire connectors that 
connect the wires from the outlet box to the fan, 
leaving the grounding wires connected. 

Turning off the power

Wiring the receiver to the fan

Installing the receiver

Removing the canopy

Choose the hanging system that most closely 
resembles the one used by your fan, and 
install the receiver and wire as directed. 

You may have installation issues if the fan is 
installed on an angled ceiling. For assistance, 
call 1-888-830-1326.

Note: Some fans may have considerable excess lead wire. For easier canopy 
installation, cut the excess wire, leaving a minimum of 8” remaining. Re-strip the fan lead 
wires 1/2”. Place remaining excess wire into the ceiling electrical box. 

To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning 
off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit 
breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. 
Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on 
the other side of the outlet box.

Note: If you are uncertain about wire colors or connections, please contact a qualified electrician.

Ceiling

Plate

Receiver

Canopy

Receiver

Canopy

Receiver

Canopy

Ceiling

Bracket

A

Fan Body

Cable Tie

To access the battery compartment, slide the 
battery door up.  

Replace the used battery with two AAA 
batteries when needed.

Install the shorter screws through 
the wall control plate and into the 
screw holes in the wall control.

Battery 

Door

Using the orange wire connectors, connect 
the blue wire from the receiver to the blue 
wire (or possibly black with white stripe wire) 
from the fan. Connect the yellow wire from the 
receiver to the black wire from the fan. 

black

blue

yellow

blue

5

Using the orange wire connectors, connect the 
black wire (ungrounded) from the ceiling to the 
black wire from the receiver. Connect the white 
wire (grounded) from the ceiling to both the 
white wire from the receiver and the white wire 
from the fan. 
AFTER ALL WIRES ARE CONNECTED and 
secured with wire connectors, re-install the 
canopy. 

Use the pull-chain switch on the fan to set 
the fan speed to the HIGH position before 
operation.

Wiring the receiver and fan to the ceiling

Turning on the power

Reference the included remote function card for 

information on how to use your wall control!

black

white

  white (grounded)

black (ungrounded)

white

on the same circuit breaker, 

you may need to perform a few extra steps to prevent interference or faulty 

operation of your remote controls. 

 

Go to www.HunterFan.com/FAQs and click “How do I properly install multiple 

remote-controlled fans?” for more information. 

Turn 

Pow

er

10

11

8

Installing the Wall Control

Install the longer screws through 
the slots in the wall control into the 
switch box screw holes.

8

Installing the Wall Control

Install the longer screws through 
the slots in the wall control into the 
switch box screw holes.

1.  Connect the grounding wire 

from the wall control to the 
ground control from the switch 
box using the provided wire 
nuts.

2.  Connect the “LIVE IN” from 

the switch box to the “~VAC” 
from the wall control using the 
provided wire nuts.

3.  Connect the “LIVE OUT” from 

the switch box to the “FAN” out 
from the wall control using the 
provided wire nuts.

4.  Push all wires into the switch 

box.

Fan On/Off

Light Dimming
Control

Dimming Mode 

On/Off

+ 

Light On/Off

Light High

Fan High

Light Low

Fan Low

Power On/Off

Long 
Press

Long 
Press

Long 
Press

Long 
Press

Long 
Press

Fan Speed 

Control

Key Press

Function