Audiotel International Limited 2-400-0001 ユーザーズマニュアル
10
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
D
ETECT
IV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
11
Using the controls and selecting options
To navigate around the various screens and select options a combination of keypad controls and
on-screen buttons are used.
on-screen buttons are used.
Controls
The navigation controls are arranged up, down, left and right in the centre of the keypad. Their use
depends on the current screen and the screen item selected. Usually the left and right controls
change the current selection left or right and the up and down controls adjust levels (alarm levels,
power levels, etc.)
depends on the current screen and the screen item selected. Usually the left and right controls
change the current selection left or right and the up and down controls adjust levels (alarm levels,
power levels, etc.)
The
control is primarily used to toggle between setting the sound volume and the current
selection. Sound volume can only be set on those screens that display the sound icon in the
DETECT and IDENTIFY modes (see under Setting the Unit volume in the DETECT mode section
of this manual)..
DETECT and IDENTIFY modes (see under Setting the Unit volume in the DETECT mode section
of this manual)..
Note On those screens where setting the sound volume is not applicable, for
convenience, this control also duplicates the most common screen option.
The
3
control is used to return back up to the parent screen of the current screen.
The p control is used in the IDENTIFY mode to pause the display and capture screen images for
later analysis.
later analysis.
Press p once to Pause the display
'
>>> P a u s e d <<<
' appears on the screen display
press p a second time to save a screen shot to the Snapshot Log
To cancel the Pause press the
3
control.
Screen Options
The touch sensitive screen is used to select items in the main menu and choosing a detector in
the Detect screen as well as operating various screen buttons that appear at the bottom of the
screen.
the Detect screen as well as operating various screen buttons that appear at the bottom of the
screen.
The NLJD Trigger control is used to turn
the NLJD On or Off.
(See under Enabling /Disabling the NLJD
later in this manual).
the NLJD On or Off.
(See under Enabling /Disabling the NLJD
later in this manual).