Audiotel International Limited 2-400-0001 ユーザーズマニュアル
26
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
D
ETECT
IV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
27
E
VENT
L
OG
To Select the EVENT LOG.
From the Main menu select LOG by either:
From the Main menu select LOG by either:
Touch the LOG icon on the screen
or
use the Left and Right controls on the keypad to highlight the LOG icon, then press
the button to select.
The EVENT LOG screen is displayed.
The EVENT LOG holds details of Alarms, screen Snapshots and Reference spectrums. These are
stored in three separate lists within the EVENT LOG. The currently selected list is indicated by the
stored in three separate lists within the EVENT LOG. The currently selected list is indicated by the
red
highlight box at the top of the screen.
Each log entry has an identifying code, as well as the date and time of the entry. The code
consists of a two letter code indicating the detector which generated the entry and a 2-digit
sequential number.
consists of a two letter code indicating the detector which generated the entry and a 2-digit
sequential number.
Note For accurate date and time details the user must have set the correct time and
date in the Config screen (see under setting time and date earlier in this manual).
Use the LEFT and RIGHT keypad controls to move the
red
highlight to the required
event list.
Use the Up and Down keypad controls to select a specific entry in a list.
Each event log list presents four on-screen buttons with the following functions:
View Displays the currently selected log entry
Delete Deletes the currently selected log entry.
Empty Deletes the entire list for the log type currently being viewed (Alarm,
Snapshot or Reference)
Item / Page Switches the Up and Down keypad function between scrolling an Item at a
time or a Page at a time
Log entry codes
CW - Broadband CW
BB - Broadband burst
HA - Harmonic receiver