National Datacomm Corporation 0610S11 ユーザーズマニュアル

InstantWave  PCI/PC Card   

step11.    The System Settings Change dialog box will ask you if you want to

restart your computer.  Remove the CD-ROM from the drive and click
Yes

step12.    After rebooting, the system will automatically install the InstantWave

Utility Program and execute it.  The user can monitor the wireless
LAN’s status and configure the adapter’s properties via this program
(see page 17 for details)

step13.    If the TCP/IP protocols are required (necessary for Internet access), add

them by clicking Start/Control Panel/Network/Configuration

That completes the hardware and driver installation.

You may need to uninstall your adapter for the following reasons:

1. 

The installation fails or is interrupted by unknown factors.  If this happens the
InstantWave Adapter will be marked with an exclamation mark “!” in Device
Manager.  Uninstall the adapter using methods described below and then
restart your computer.  The Windows 95 plug and play function will detect
the adapter again

2. 

You want to remove the device

The uninstallation process is as follows:

To completely remove the adapter and driver from your system you will need to

physically remove the adapter (with the system powered off).  The removal
procedure is the reverse of the Hardware Installation procedure on page 5.  Restart
the computer and then proceed as follows:

step1.    In Control Panel click the Network icon

step2.    Highlight the InstantWave adapter driver entry

step3.    Click the Remove button to remove the old InstantWave adapter driver

step4.    Click OK.  The system will ask you to restart the PC.  Click Yes