National Datacomm Corporation 0610S11 ユーザーズマニュアル

16   

step11.    Security is enabled to restrict unauthorized access.  When security is

enabled a Security ID is requested (Figure 26)

step12.    The longest string for the security ID is eight characters.  All the

wireless devices must have the same Security ID in order to
communicate with each other.  Enter a Security ID and click OK.
Windows NT will begin copying files

step13.    The InstantWave Adapter will now be shown on the Adapters card in

the Network  configuration box.  Click Close

step14.    If the user needs to bind the adapter to TCP/IP, then the TCP/IP

protocols  must be added

step15.    The Network Settings Change dialog box will ask you to restart the

computer.  Remove the floppy disk from the floppy drive and click  Yes
to complete the installation

step16.    Owing to Windows NT constraints, the InstantWave Windows Utility

Program will not be automatically installed.  The user needs to install
this program by following the procedure described on page 17

step1.    Click Start/Settings/Control Panel, and double-click the Network icon.

step2.    Highlight the InstantWave adapter driver entry and click Remove

step3.    Click Close.  The system will ask you to restart the PC.  Click Yes