National Datacomm Corporation 0610S11 ユーザーズマニュアル

InstantWave  PCI/PC Card   

(Extended Service Set ID).  Having the same Domain Name allows all
wireless nodes in the same Domain (or Cell) to communicate with each other.
The default setting is Wireless

•

 

Carrier Set - This is preset to the U.S.A., Canada, Europe, Spain, France, or
Japan depending on where the product is sold.  The parameter shown indicates
which Radio Frequency (RF) 802.11 specification is currently in use in the
adapter

•

 

Enable Roaming  - Roaming can be turned on or off.  When roaming is
enabled, the station is allowed to roam to another Access Point in the same
domain when the radio signal quality of the currently connected AP is below
an acceptable level

•

 

Security Setting - Security can be turned on to restrict unauthorized access.
When Security is enabled a Security ID is requested.  The longest string for
the Security ID is eight characters.  All the wireless devices must have the
same Security ID in order to communicate with each other

Click OK to close the window.  A pop-up screen will ask if you wish to reboot
your computer to make the changes effective.  Click Yes

 Click the Advanced Information  tab to view the Adapter Properties (Figure 33).

 

 The window is divided into three sections as described below:

•

 

Basic Information - This section contains the manufacturer’s name and the
InstantWave MAC firmware version number.  The information is read from
the MAC firmware of the InstantWave card