National Datacomm Corporation 0630S02 ユーザーズマニュアル

6   

Getting Started

This section explains how to quickly setup a wireless station.

To install the InstantWave PCI Card into a computer, simply follow these steps:

step1.    Turn off the power to your computer and all peripherals and unplug the

power cord from the wall socket

step2.    Remove the computer’s cover

step3.    Select a free PCI Bus expansion slot and remove the slot cover

step4.    Carefully install the card in the expansion slot by firmly pressing until

the card is snugly seated.  Be sure the card is fully home.  Fasten the
retaining bracket with the screw from the slot cover

step5.    Replace the computer cover

 

and reconnect the previously disconnected

cables

step6.    Screw the antenna into the InstantWave card (Figure 5).

F

IGURE 

5.   C

ONNECTING THE 

A

DAPTER 

C

ARD 

A

NTENNA

step7.    Repeat the above procedure to fit an InstantWave card into each of the

other computers to be networked

The PC Card fits into a Type II or Type III PCMCIA slot.  The antenna is encased
in a plastic case, in line with the main body of the PC card, such that it extends
outside the PCMCIA slot when the card is inserted.  The slot must allow for a card
extension of up to 30mm as specified in the PC Card specifications.